Honda Accord: Component Location Index


'10 model


A/C Service Tips and Precautions
• Compressed air mixed with the R-134a forms a
combustible vapor.
• The vapor can burn or explode causing serious
injury.
• Never use compressed air to pres ...
See also:
Front Door Panel Removal/Installation
Special Tools Required
-KTC Trim Tool Set SOJATP2014*
-Trim Pad Remover Snap-on A 177A,
commercially
available
*Available through the Honda Tool and
Equipment
Program; call 888-424-6857
2-do ...
Block and Piston inspection
1. Remove the crankshaft and the pistons (see page
7-14).
2. Check the piston for distortion or cracks.
3. Measure the piston diameter at a point 13 mm (0.5 in)
from the bottom of the skirt. T ...
Secondary Shaft Disassembly,
Inspection, and Reassembly
1. Inspect the thrust needle bearings a n d the needle bearings for g a l l i
n g and rough movement
2. Inspect the splines for excessive wear and damage.
3. Check the shaft bearing surface fo ...
