Openers

...

Hood Opener Cable Replacement

NOTE: - Put on gloves to protect your hands. - Take care not to scratch the body or the related parts. - Take care not to kink the hood opener cable. 1. Remove these items: - Front grille c ...

See also:

Taillight and Back-Up Light Bulbs
When replacing, use the following bulbs. 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2. Turn the socket to the left and remove it. 3. Remove the ol ...

A/T Clutch Pressure Control Solenoid Valve B and C Test
1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the ...

Safety Labels
Label Locations These labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels carefully. If a label comes off or becomes h ...