Glass

...

Windshield Replacement

NOTE: - Put on gloves to protect your hands. - Wear eye protection while cutting glass adhesive with a piano wire. - Use seat covers to avoid damaging any surfaces. - Glass adhesive can be ...

See also:

Brake/Taillight and Rear Turn Signal Light/Rear SideMarker Light Bulbs
When replacing, use the following bulbs. 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2. Turn the socket to the left and remove it. 3. Remove the ...

End Cover Removal
Special Tools Required Mainshaft Holder 07GAB-PF50101 1. Remove the three bolts (D) securing the ATF cooler inlet line brackets, the ATF filter bracket bolts (E), the ATF cooler line banjo bolts ...

Door Lock Knob Switch Test
Driver's Door 1. Remove the driver's door panel (see page 20-17). 2. Disconnect the 10P connector (A) from the door lock actuator (B). 3. Check for continuity between the terminals. • ...