Honda Accord: Compass Zone Selection
1. Set the power mode to ON.
2. On the top screen of any audio source,
press and hold 
for 5
seconds.
- The display switches to the Compass
Settings screen.
3. Rotate 
to select Zone Adjust,
then
press .
- The display shows the current zone
number.
4. Rotate to select the zone number
of
your area (See Zone Map), then press .
The zone selection is done to compensate the variation between magnetic north and true north.
If the calibration starts while the audio system is in use, the display returns to normal after the calibration is completed.
Compass Calibration
If the compass indicates the wrong direction, or the CAL indicator
blinks, you need
to manually calibrate the system.
Compass operation can be affected under the
following conditions:
• Driv ...
Driving
This chapter discusses driving, refueling, and
information on items such as accessories. ...
See also:
Shift Fork Disassembly/Reassembly
NOTE: Prior to reassembling, clean all the parts in solvent, dry them, and
apply MTF to all contact surfaces
...
Navigation Display Unit
Removal/Installation
1 Remove the audio unit (see page 23-114), then
remove the center display visor (see page 20-171).
2. Remove the screws and bolts (A), then pull out the
navigation display unit (B).
3. Install ...
Maintenance Safety
All service items not detailed in this
section should be performed by a
certified technician or qualified
mechanic.
Important Safety Precautions
To eliminate potential hazards, read
the inst ...