Security System

The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights and taillights flashes if someo ...

Compass Operation

Compass operation can be affected by driving near power lines or stations, across bridges, through tunnels, over railroad crossings, past large vehicles, or driving near large objects that c ...

See also:

Reverse Shift Fork Clearance Inspection
1. Measure the clearance between the reverse Idler gear (A) and the reverse shift fork (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2. Standard; 0.20-0.59 mm ...

CMP Sensor A Replacement
1. Disconnect the CMP sensor A 3P connector (B). 2. Remove CMP sensor A from the intake camshaft side of the cylinder head. 3. Install the parts in the reverse order of removal with a new O-ri ...

Rocker Arm and Shaft inspection
1. Remove the rocker arm assembly (see page 6-81). 2. Disassemble the rocker arm assembly (see page 6-82). 3. Measure the diameter of the shaft at the first rocker location. 4. Zero the gau ...