Honda Accord: Climate Control Unit Removal / Installation
With Navigation
1. Remove the passenger's dashboard undercover (see page 20-170).
2. Disconnect the connectors (A). Loosen the bolt (B) and remove the bolts (C) from the climate control unit (D).
3. Install the control unit in the reverse order of removal.
After installation, operate the various functions to make sure they work properly.
4. Run the self-diagnostic function to confirm that there are no problems in the system (see page 21-102).
Without Navigation
1. Remove the audio unit (see page 23-115).
2. Remove the self-tapping screws and the climate control unit (A). If necessary, replace the bulbs (B).
3. Install the control unit in the reverse order of removal.
4. Run the self-diagnostic function to confirm that there are no problems in the system (see page 21-102).
Recirculation Control Motor Test
NOTE: Before testing the motor, check for HVAC DTCs (see page 21-101). 1. Disconnect the 7P connector from the recirculation control motor. Incorrectly applying power and ground to the recirc ...Climate Control Switch Removal / Installation
With Navigation 1 Remove the audio unit (see page 23-114). 2. Remove the self-tapping screws and the climate control switches (A). If necessary, replace the bulbs (B). 3. Install the switches ...See also:
Vehicle Identification Number
a. Manufacturer, Make, and Type of Vehicle
1HG: Honda of America Mfg., Inc.
Honda passenger vehicle
JHM: Honda Motor Co., Ltd.
Honda passenger vehicle
b. Line, Body, and Engine Type
CP2: Accor ...
DTC Troubleshooting
DTC indicator 1: An Open in the Air Mix
Control Motor Circuit
1. Turn the ignition switch to LOCK (0), and then to
ON (II).
2. Do the self-diagnostic function with the HVAC control
unit (see pa ...
A/C Compressor Replacement
NOTE: Do not install the A/C compressor into a system
unless you are completely sure that the system is free of
contamination. Installing the A/C compressor into a
contaminated system can result in ...