Honda Accord: Cleaning
Heating and Cooling System*/ClimateControl System* Maintenance
Dust and Pollen Filter
The heating and cooling system*/climate control system* is equipped with a
dust
and pollen filter that collects pollen, dust, and other debris in the air. The
Maintenance ...
Interior Care
Use a damp cloth with a mixture of mild detergent and warm water to remove
dirt.
Use a clean cloth to remove detergent residue.
Do not spill liquids inside the vehicle.
Electrical devices and ...
See also:
Front Door Outer Molding
Replacement
Special Tools Required
KTC Trim Tool Set SOJATP2014*
*Available through the Honda Tool and
Equipment
Program; call 888-424-6857
NOTE:
- If you remove the door outer molding, replace it with a
...
CMP Sensor B Replacement
1. Disconnect the connector (A) and hoses (B) from the
EVAP canister purge valve (C), then remove the EVAP
canister purge valve assembly.
2. Disconnect the CMP sensor B connector (A).
3. Remov ...
Reverse Idler Gear Removal and
Installation
Removal
1. Remove the bolt (A) securing the reverse idler gear
shaft holder (B).
2. Install a 5 x 0.8 mm bolt (C) in the reverse idler gear
shaft (D), and pull it to remove the reverse idler gea ...