Honda Accord: Circuit Diagram - Accessory Power Sockets - Body Electrical - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Circuit Diagram

Front Accessory Power Socket


    Component Location index
    ...

    Front Accessory Power Socket Test/Replacement
    NOTE: If all of the front and console accessory power sockets do not work, check the No. 18 (7.5: A> fuse in the driver's under-dash fuse/relay box and ground (G503) first. 1. Remove the cent ...

    See also:

    FTP Sensor Replacement
    1. Remove the bolt (A), and disconnect the EVAP canister vent shut valve 2P connector (B), the FTP sensor 3P connector (C), and the hoses (D). 2. Remove the bolts (E), and move the EVAP canister ...

    HFL System Troubleshooting
    NOTE: • Before doing this troubleshooting, refer to General Troubleshooting Information (see page 23-254) to make sure the phone is compatible and configured correctly. • You must be ...

    Brake Pedal Position Switch Signal Circuit Troubleshooting
    1. Turn the ignition switch to ON (II). 2. Check the BRAKE SWITCH in the DATA LIST with the HDS. Does it indicate OFF? YES-Go to step 3. NO-lnspect the brake pedal position switch (see page ...