Coat Hook

To use a coat hook, pull it down. Close it with a firm push. Make sure the coat hook is closed when you are not using it. This hook is not designed for large or heavy items. ...

Interior Lights

...

See also:

CMP Pulse Plate A Replacement
1. Remove the cylinder head cover (see page 6-73). 2. Remove camshaft position (CMP) sensor A (see page 11-274). 3. Hold the camshaft with an open-end wrench, then loosen the bolt. 4. Remov ...

Bearing Installation
Special Tools Required -Attachment, 78 x 80 mm 07NAD-PX40100 -Driver Handle, 15 x 135L 07749-0010000 -Bearing Driver Attachment, 42 x 47 07746-0010300 1. Install the bearings in the direction show ...

Replacing a Front Turn Signal/Parking Light Bulb
1.  Open the hood. To change the turn signal bulb on the passenger’s side, remove the engine coolant reserve tank by pulling it out of its stay. Driver’s side on V6 models Remove t ...