Rear Seat Cushion Cover Replacement

NOTE: -Put on gloves to protect your hands. - Take care not to tear or damage the seat covers. 1. Remove the seat cushion (see page 20-241). 2. From the back of the seat-back, release all th ...

Front Bumper Removal/Installation

NOTE: - Have an assistant help you when removing and installing the front bumper. - Take care not to scratch the front bumper or the body. - Put on gloves to protect your hands. - When pr ...

See also:

Parking Light Bulbs
When replacing, use the following bulbs. Turn the steering wheel and pull the inner fender back in the same way as when replacing the front turn signal/side marker light bulbs. 1. Turn the s ...

Throttle Body Cleaning
Do n o t i n s e r t : your fingers into the installed throve body when you turn the ignition switch to ON (II) or while the ignition switch is in ON (II). If you do, you will seriously injure your ...

Reverse Idler Gear Removal and Installation
Removal 1. Remove the bolt (A) securing the reverse idler gear shaft holder (B). 2. Install a 5 x 0.8 mm bolt (C) in the reverse idler gear shaft (D), and pull it to remove the reverse idler gea ...