Tire Pressure Monitoring System (TPMS) -Required Federal Explanation

Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire infl ...

Brake System

• Parking Brake Use the parking brake to keep the vehicle stationary when parking. To apply: Pull the lever fully up without pressing the release button. To release: 1. Pull the lever sli ...

See also:

A/C Compressor Clutch Overhaul
Special Tools Required • A/C Clutch Holder Robinair 10290 or Kent-Moore J37872, commercially available • A/C Clutch Holder Honda Tool and Equipment ACT499A, commercially available 1. Re ...

Rear Brake Disc Replacement
NOTE: Keep any grease off the brake disc and the brake pads. 1. Raise and support the vehicle (see page 1-13). 2. Remove the rear wheel. 3. Release the parking brake lever fully. 4. Loose ...

Knock Sensor Replacement
1. Remove the intake manifold (see page 9-4). 2. Disconnect the knock sensor connector (A). 3. Remove the knock sensor (B). 4. Install the parts in the reverse order of removal. ...