Honda Accord: Brake Hose and Line Inspection
1. Inspect t h e brake hoses for d a m a g e , deterioration, leaks, interference, and twisting.
2. Check the brake lines for damage, rusting, and leaks. Also check for bent brake lines.
3. Check for leaks at hose and line joints and connections, and retighten if necessary.
4. Check the master cylinder and the VSA modulator-control unit for damage and leaks.
Brake Pedal Replacement
1. Disconnect the brake pedal position switch
connector ( A ) .
2. Remove the lock pin (B) and the clevis pin (C).
3. Remove the brake pedal support member (D).
4. Remove the brake pedal bra ...
Brake Hose Replacement
NOTE;
- Before reassembling, cheek that all parts are free of
dirt and other foreign particles.
- Replace parts with new ones whenever specified to do
so.
- Do not spill brake fluid on the ve ...
See also:
Immobilizer Key Registration
NOTE:
• The HDS is required for registration of the immobilizer
keys.
• Programming the immobilizer also programs the
keyless transmitter.
• Check for aftermarket electrical eq ...
Restraints
Special Tools
...
DTC Troubleshooting
DTC B1077: Windshield Wiper Auto-stop (AS)
Signal Circuit Malfunction
NOTE: If you are troubleshooting multiple DTCs, be sure
to follow the instructions in B-CAN System Diagnosis
Test Mode A (see ...