Winter Tires

If driving on snowy or frozen roads, mount all season marked M+S tires, snow tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving. Be particularly ...

Checking the Battery

Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion. The battery condition is being monitored by the sensor on the negative terminal. ...

See also:

Waive Guide Replacement
Special Tools Required Valve Guide Driver, 5.35 x 9.7 mm 07742-0010100 Valve Guide Reamer, 5.5 mm 07HAH-PJ7A100 1. Inspect the valve stem-to-guide clearance (see page 6-88). 2. As illustrated, ...

A/F Sensor Replacement
Special Tools Required 02 Sensor Wrench Snap-on S6176 or equivalent, commercially available 1. Disconnect the A/F sensor 4P connector (A), then remove the A/F sensor (B). 2. Install the parts i ...

Countershaft Inspection
1. Inspect the gear and bearing contact areas for wear and damage, then measure the countershaft at points A, B, and C. If any part of the countershaft is less than the service limit, replace it. ...