Honda Accord: Auto Door Locking/Unlocking
Your vehicle has customizable settings for the doors to automatically lock and unlock. There are default settings for each of these features. You can turn off or change the settings for these features as described on the following pages.
When you customize the setting, make sure your vehicle is parked safely, the engine is off, and the parking brake is applied. Make all settings before you start driving.
U.S. V6 models, and Canadian EX-L and V6 models with navigation system
NOTE: When customizing a setting, use the appropriate remote transmitter (Driver 1 or Driver 2).
To customize, remove the master key with the remote transmitter, and press the UNLOCK button once.
Door Locks
To lock both doors, push the front of
the master door lock switch on
either door, pull the lock tab
rearward on the driver’s door, or use
the key on the outside lock on the
driver’s do ...
Auto Door Locking
The auto door locking feature has
three possible settings:
The auto door locking is
deactivated all the time.
The doors lock whenever you
move the shift lever out of the
Park (P) position (A ...
See also:
Wheel Bolt Replacement
Special Tools Required
B a i l Joint Remover, 28 mm 07MAC-SL0A202
- Do not use a hammer or impact tools (pneumatic or
electric) to remove and install the wheel bolts.
- Be careful not to damag ...
Shift Lock Solenoid Test
1. Connect the HDS to the DLC (A) located under the
driver's side of the dashboard.
2. Turn the ignition switch to ON (II). Make sure the HDS
communicates with the PCM. If it does not, go to the
...
Valve, Spring, and Valve Seal Installation
Special Tools Required
Stem Seal Driver, 30 mm 07PAD-0010000
Valve Spring Compressor Attachment 07757-PJ1010A
1. Coat the valve stems with new engine oil. Install the
valves in the valve guides.
...