Honda Accord: Audio with Touch Screen
Use the touch screen to operate the audio system.
• Selecting an Audio Source
Select Source, then select an icon on the source list to switch the audio source.
• Displaying the Menu Items
Select More to display the menu items.
Icons that appear on the screen vary by the source selected.
Select to go back to the previous screen.
Use the icons to turn the page.
• Adjusting the Sound
1. Select More, then Sound Settings.
2. Use or others to adjust the
setting.
Select Off, Low, Mid or High for the SVC setting.
• Changing the Screen Settings
1. Select More, then Screen Settings.
2. Use or others to adjust the
setting.
The followings are adjustable screen settings:
• Brightness
• Contrast
• Black Level
• Display
Changes between the daytime or nighttime
modes.
• Beep
Mutes a beep that sounds every time you touch the
screen.
• Keyboard
Changes the on-screen keyboard from the
alphabetical order to the qwerty type.
• Blackout
Sets the screen black out timing.
Audio System Basic Operation
To use the audio system function, the power mode must be in ACCESSORY or ON. Use the interface dial or MENU button to access some audio functions. Press to switch between the normal and ext ...Audio/Information Screen
Displays the audio status and wallpaper. From this screen, you can go to various setup options. • Switching the Display Press the (display) button to change the display. You can also use ...See also:
Using the Trunk Release Button*
Push up the release button on the trunk lid
after the doors are unlocked.
Even if the trunk is locked, you can open the
trunk if you carry the smart entry remote.
uThe beeper will sound.
• ...
A/C Compressor Clutch Circuit
Troubleshooting
NOTE:
• It is normal for the A/C compressor to turn off under
certain conditions, such as low idle, high engine
coolant temperature, hard acceleration, or high/low
refrigerant pressure.
в ...
Brake Pedal Position Switch Signal
Circuit Troubleshooting
1. Turn the ignition switch to ON (II).
2. Check the BRAKE SWITCH in the DATA LIST with the
HDS.
Does it indicate OFF?
YES-Go to step 3.
NO-lnspect the brake pedal position switch (see page ...