Immobilizer-Keyless Control Unit Replacement

1 . Remove the driver's dashboard lower cover (see page 20-166). 2. Remove the steering column covers (see page 20-181). 3. Disconnect the 7P connector (A) from the immobilizer-keyless contro ...

Audio System

...

See also:

Countershaft Inspection
1. Inspect the gear and bearing contact areas for wear and damage, then measure the countershaft at points A, B, and C. If any part of the countershaft is less than the service limit, replace it. ...

Jump Starting
• Jump Starting Procedure Turn off the power to electric devices, such as audio and lights. Turn off the engine, then open the hood. 1. Connect the first jumper cable to your vehicle's bat ...

In-car Temperature Sensor Replacement
1. Remove the driver's inner dashboard trim (see page 20-167). 2. Disconnect the connector (A), and remove the in-car temperature sensor (B) from the air hose (C). 3. Install the sensor in the ...