Honda Accord: ATF Cooler Hose Replacement
Exploded View
NOTE: When installing the hose clamps, make sure they do not interfere with the surrounding parts.
1. Install the ATF cooler hoses over the ATF cooler lines with the clips at appropriate points in reference to the following list. Align the pink paint mark (J) pointing up, and the white paint mark (K) pointing down.
2. Secure the ATF cooler hose with the clamp (M) at the pink paint line (N).
3. Refill the transmission with ATF to the proper level (see page 14-191).
ATF Cooler Cleaning
Special Tools Required
•ATF Cooler Cleaner GHTTTCF6H
-Magnetic Nonbypass Spin-On Filter GTHGNBP2*
*: Available through the Honda Tool and Equipment
Program 888-424-6857.
Before installing an ...
ATF Filter Replacement
NOTE: The ATF filter is not a scheduled maintenance
item. Replace the filter only if it is leaking, or
contaminated, or when the transmission is being
overhauled or replaced with a remanufactured u ...
See also:
System Check
1. Connect the HDS to the data link connector.
2. Turn the ignition switch to ON (II).
3. Monitor the SYSTEM CHECK in the IMMOBILIZER INFO with the HDS.
4. If the HDS displays NORMAL N-1,the ...
Driver and Passenger Safety
This section gives you important
information about how to protect
yourself and your passengers. It
shows you how to use seat belts. It
explains how your airbags work. And
it tells you how to ...
Introduction
One of the best ways to enhance the enjoyment of your new vehicle is to
read this manual. In it, you will learn how to operate its driving controls and
convenience items. Afterwards, keep this own ...