Rear Seats

• Folding Down the Rear Seat 1. Remove the center shoulder belt from the guide. 2. Pull the release lever in the trunk to release the lock. 3. Fold the seat-back down. If the rear head ...

Interior Lights/Interior ConvenienceItems

• Interior Light Switches • ON The interior lights come on regardless of whether the doors are open or closed. • Door activated The interior lights come on in the following situations: ...

See also:

Secondary Shaft 1 st Gear Axial Clearance Inspection
Special Tools Required Attachment, 42 mm I.D. 07QAD-P0A0100 1. Remove the secondary shaft transmission housing bearing (see page 14-270). 2. Install the thrust needle b e a r i n g (A), the need ...

Shift Solenoid Valve Test, Replacement, and Shift Solenoid Wire Harness Replacement
1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not go to the ...

Mainshaft Bearing and Oil Seal Replacement
Special Tools Required -Adjustable Bearing Puller, 2 5 - 4 0 mm 07736-A01000B -Driver Handle, 15 x 135L 07749-0010000 -Attachment, 62 x 68 mm 07746-0010500 -Attachment, 72 x 75 mm 07746-0010600 1 ...