Honda Accord: Airbag Care - Airbags - Safe Driving - Honda Accord 2013-2022 Owner's ManualHonda Accord: Airbag Care

You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations:

• When the airbags have deployed

If an airbag has inflated, the control unit and other related parts must be replaced.

Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.

• When the vehicle has been in a moderate-to-severe collision

Even if the airbags did not inflate, have your dealer inspect the following: the driver’s seat position sensor, weight sensors in the passenger’s seat, front seat belt tensioners, and each seat belt that was worn during the crash.

• Do not remove or modify a front seat without consulting a dealer

This would likely disable the driver's seat position sensor or the weight sensors in the passenger's seat. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer, or for U.S. vehicles, American Honda Automobile Customer Service at 800-999-1009 and for Canadian vehicles, Honda Canada Customer Relations at 888-9-HONDA-9.

We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.

    Airbag System Indicators
    If a problem occurs in the airbag system, the SRS indicator will come on and a message appears on the multi-information display*. • SRS (Supplemental Restraint System) Indicator • When the i ...

    Child Safety
    ...

    See also:

    Drive Belt Auto-tensioner Inspection
    Special Tools Required Belt Tension Release Tool Snap-on YA9317 or equivalent, commercially available 1. Turn the ignition switch to ON (II), and make sure to turn the A/C switch OFF. Turn the ign ...

    Brake System Inspection and Test
    Inspect the brake system components listed. Repair or replace any parts that are leaking or damaged. Component Inspections: Brake System Test Brake pedal sinks/fades when braking 1. Set the pa ...

    Washer Tube Replacemen
    1. Remove the right front inner fender (see page 20-290). 2. Remove the windshield washer nozzles and clips, then remove the tubes. *1:USA models *2: Canada models 3. Install in the reverse or ...