Power Door Mirrors

You can adjust the door mirrors when the ignition switch is in ON . • Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the ...

Adjusting the Seat Positions

Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequatel ...

See also:

Symptom Troubleshooting
Rapid brake pad wear, vehicle vibration (after a long drive), or high, hard brake pedal NOTE: Make sure that the caliper pins are installed correctly. Upper caliper pin B and lower caliper pin A ar ...

Wheel Speed Sensor Replacement
Front 1. Turn the ignition switch to LOCK (0). 2. Release the clamp (A), then disconnect the wheel speed sensor connector (B). 3. Remove the bolts and the wheel speed sensor (C). 4. Install ...

Control Unit Input Test
NOTE: Before testing, troubleshoot the multiplex integrated control unit first, using B-CAN System Diagnosis Test Mode A (see page 22-134), and make sure the lighting system works properly. Driver ...