Honda Accord: ABS (Anti-lock Brake System) - Braking - Driving - Honda Accord 2013-2024 Owner's ManualHonda Accord: ABS (Anti-lock Brake System)

NOTICE

The ABS may not function correctly if you use an incorrect tire type and size.

When the ABS indicator comes on while driving, there may be a problem with the system.

While normal braking is not affected, there is a possibility of the ABS not operating. Have the vehicle checked by a dealer immediately.

The ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with steering control during hard braking.

In the following cases, your vehicle may need more stopping distance than a vehicle without the ABS:

• When driving on rough road surfaces, including when driving on uneven surfaces, such as gravel or snow.
• When tire chains are installed.

You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.

• ABS

Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you.

The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.

You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as “stomp and steer.”

• ABS operation

The brake pedal may pulsate slightly when the ABS is working. Keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.

    Brake System
    • Parking Brake Use the parking brake to keep the vehicle stationary when parking. To apply: Pull the lever fully up without pressing the release button. To release: 1. Pull the lever sli ...

    Brake Assist System
    • Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking. • Brake assist system operation Press ...

    See also:

    Ambient Light Replacement
    With moonroof NOTE: The ambient light is built into the moonroof switch. 1. Remove the front individual map lights (see page 22-258). 2. Disconnect the moonroof switch 12P connector (A) and ...

    Paint Code
    ...

    CKP Sensor Replacement
    1. Raise the vehicle on a lift. NOTE: Make sure the vehicle is level, because engine oil will drip out when you remove the sensor. 2. Remove the CKP sensor cover (A). 3. Disconnect the CKP s ...