Honda Accord: A/T interlock System
Eighth generation (2008–2012) / Honda Accord MK8 2008-2012 Service Manual / Transaxle / A/T interlock System
- Component Location Index
- Circuit Diagram
- Shift Lock System Circuit Troubleshooting
- Shift Lock Solenoid Test
- Shift Lock Solenoid Replacement
- Shift Lock Stop/Shift Lock Stop Cushion Replacement
- Shift Lock Release, Release Spring, and Release Shaft Replacement
- Park Pin Switch Replacement
A/T Gear Position Indicator Panel Light
Harness Replacement
Type A Shift Lever
NOTE: The A/T gear position indicator panel light
harness and the park pin switch are not available
separately. Replace the A/T gear position indicator panel
light harness and t ...
See also:
Countershaft Disassembly, Inspection,
and Reassembly
1. Inspect the needle bearings for galling and rough movement.
2. Inspect the splines for excessive wear and damage.
3. Check the shaft bearing surface for scoring and excessive wear.
4. Lubr ...
Troubleshooting
B-CAN System Diagnosis Test Mode
A
Check the ECM/PCM for DTCs and troubleshoot .
ECM/PCM (see page 11-3) or F-CAN loss of
communication errors first, then do this diagnosis if the
symptom is related to the B-CAN system.
1. Comp ...
Intermediate Shaft Disassembly
Special Tools Required
•Half Shaft Base 07NAF-SR30101
-Oil Seal Driver, 44.5 mm 07947-SB00100
1. Remove the heat shield (A).
3. Press the intermediate shaft (A) out of the
intermediate s ...