Honda Accord: Turn Signals - Operating the Switches Around theSteering Wheel - Controls - Honda Accord 2013-2024 Owner's ManualHonda Accord: Turn Signals

The turn signals can be used when the ignition

The turn signals can be used when the ignition switch is in ON • One-touch turn signal.

• One-touch turn signal

When you lightly push up or down and release the turn signal lever, the exterior turn signals and turn signal indicator blink three times.

This feature can be used when signaling for a lane change.

    Ignition Switch and Power ModeComparison
    ...

    Light Switches
    • Manual Operation Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch*1. • High beams Push the lever forward until you hear a click. ...

    See also:

    Replacing the High-mount Brake Light Bulb
    1. Open the trunk, and remove the socket from the light assembly by turning it one-quarter turn counterclockwise. 2. Pull the bulb straight out of its socket. Push the new bulb straight int ...

    Windshield Washers
    Check the level in the windshield washer reservoir at least monthly during normal use. Check the fluid level by removing the cap and looking at the level gauge. On Canadian models: The low ...

    ATF Temperature Sensor Test/Replacement
    1. Raise the vehicle on a lift, or apply the parking brake, block both rear wheels, and raise the front of the vehicle. Make sure it is securely supported. 2. Remove the splash shield. 3. Disc ...