Honda Accord: Tire and Wheel Replacement - Checking and Maintaining Tires - Maintenance - Honda Accord 2013-2020 Owner's ManualHonda Accord: Tire and Wheel Replacement

Replace your tires with radials of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires of a different size or construction can cause the ABS and VSA® (vehicle stability assist) system to work incorrectly.

It is best to replace all four tires at the same time. If that isn’t possible, replace the front or rear tires in pairs.

Make sure that the wheel’s specifications match those of the original wheels.

WARNING

Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed.

Always use the size and type of tires recommended in this owner’s manual.

    Tire Service Life
    The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (eve ...

    Tire Rotation
    Rotating tires according to the maintenance messages on the information display*/ multi-information display* helps to distribute wear more evenly and increase tire life. Tires with directional ...

    See also:

    Secondary Shaft 1 st Gear Axial Clearance Inspection
    Special Tools Required Attachment, 42 mm I.D. 07QAD-P0A0100 1. Remove the secondary shaft transmission housing bearing (see page 14-270). 2. Install the thrust needle b e a r i n g (A), the need ...

    Component Location Index
    ...

    A/T Clutch Pressure Control Solenoid Valve A Test
    1. Connect the HDS to the DLC (A) located under the driver's side of the dashboard. 2. Turn the ignition switch to ON (II). Make sure the HDS communicates with the PCM. If it does not, go to the ...