Honda Accord: PCV Valve Replacement - PCV System - Fuel and Emissions - Honda Accord MK8 2008-2012 Service ManualHonda Accord: PCV Valve Replacement

1. Disconnect the PCV hose.

2. Remove the PCV valve (A).

3. Install the parts in the reverse order of removal with a


3. Install the parts in the reverse order of removal with a new washer (B).

    PCV Valve Inspection
    1. Check the PCV valve (A), hoses (B), and connections for leaks or restrictions. 1.PCV valve when the hose between the PCV valve and intake manifold is lightly pinched (A) with your fingers or ...

    EVAP System
    ...

    See also:

    Status Log
    If you suspect there is a immobilizer system problem, check the status log. 1. Connect the HDS to the data link connector. 2. Turn the ignition switch to ON (II). 3. On the HDS screen, at MAI ...

    DTC Troubleshooting
    DTC P0122: TP Sensor A Circuit Low Voltage NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information (see page 11-3). 1. ...

    B-CAN System Diagnosis Test Mode B
    Do this diagnosis if any of the control units are not communicating (Not Available is displayed in the HDS) as found by the B-CAN System Diagnosis Test Mode A (see page 22-134). 1. Using the HDS ...