Honda Accord: Introduction - Honda Accord MK8 2008-2012 Service ManualHonda Accord: Introduction

Honda Accord MK8 2008-2012 Service Manual
...

How to Use This Manual
This manual is divided into multiple sections, The first page of each section is marked with a black tab that lines up with its corresponding thumb index tab on this page and the back cover. You ...

See also:

Change Lever Clearance Inspection
1. Measure the clearance between the change lever (A) and the select lever (B) with a feeler gauge (C). If the clearance exceeds the service limit, go to step 2. Standard: 0.05-”0.25 mm (0.002 ...

Receiver/Dryer Desiccant Replacement
NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air. 1. Remove the A/C condenser (see page 21 -77). 2. Remove the bolts from the ...

Evaporator Temperature Sensor Test
NOTE: Before testing the sensor, check for HVAC DTCs (see page 2 1 - 9). 1. Remove the evaporator temperature sensor (see page 21-67). 2. Dip the sensor in ice water, and measure the resistan ...