Honda Accord: Fluid Locations - Maintenance - Honda Accord 2008-2012 Owner's ManualHonda Accord: Fluid Locations

4-cylinder models
4-cylinder models

V6 models
V6 models

    Owner’s Maintenance Checks
    You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed. Engine oil level Check every time you fi ...

    Adding Engine Oil
    Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage ...

    See also:

    Rack Guide Adjustment
    Special Tools Required Locknut Wrench, 40 mm 07MAA-SL00100 or Locknut Wrench, 41 mm 07916-SA50001 1. Set the front wheels in the straight ahead position. 2. Loosen the rack guide screw locknut ( ...

    Climate Control Switch Removal / Installation
    With Navigation 1 Remove the audio unit (see page 23-114). 2. Remove the self-tapping screws and the climate control switches (A). If necessary, replace the bulbs (B). 3. Install the switches ...

    Block and Piston inspection
    1. Remove the crankshaft and the pistons (see page 7-14). 2. Check the piston for distortion or cracks. 3. Measure the piston diameter at a point 13 mm (0.5 in) from the bottom of the skirt. T ...