Symptom Troubleshooting Index

NOTE: Do an all DTC check with the HDS and troubleshoot those first before following the repair procedures listed in the index. ...

System Description

General Description The automatic transmission is a transverse-mounted three-shaft design, implemeting an electronically controlled hydraulic circuit that provides five forward speeds and one in r ...

See also:

General Troubleshooting Information
How to Check for DTCs with the HDS There are three methods used to check for DTCs. The recommended method is to use the Honda Diagnostic System (HDS) with the appropriate software, plugged into th ...

Synchro Sleeve and Hub Inspection and Reassembly
1. Inspect the gear teeth on all synchro hubs and synchro sleeves for wear (rounded off corners). 2. Install each synchro hub (A) in its mating synchro sleeve (B), and check for free movement. Ma ...

Auxiliary Input Jack
The auxiliary input jack is inside the console compartment. The system will accept auxiliary input from standard audio accessories using a 1/8 inch (3.5 mm) stereo miniplug. When you plug i ...